Ace Hand Molds

18107 Lakefront Drive
Lutz, Florida 33548
Call: 813-948-1461

ACE HOT METAL HAND MOLDING SYSTEM

Ace Hand Molds and Fishing Molds Ace Hand Molds and Fishing Molds

Ace Hand Molds can be used for casting
lead, bismuth, tin and oven or air dried plastics.

Ace molds are made out of carbon and rubber and other proprietary materials. They range from 3” to 12” in length in one inch increments. The price is $24 for a 3” and increases $5 per inch up to 12” @ $69.

The molds are 2 1/4”, 2 1/2” and 3” wide and 1” thick. The Molds split in half lengthwise, exposing the castings, which can be dumped or picked out. The mold halves have self aligning cones for foolproof alignment. Hot metal, (500° to 1000°) is poured with a bottom pour pot or ladled in from a molten metal container. The sprues or gates, where the hot metal was poured into the mold, can be trimmed off with a diagonal cutter, (flush cut is the best).

The Mold is held in place with a wood clamp made with two 14” wood arms and a hinge. The clamp pressure is adjustable made possible by a screw and slots on the end of the clamp arms. The clamp fits all molds so only one clamp is necessary. Clamp cost $10.

Ace molds are very forgiving. For example, Metal molds are preset to use exact inserts, (hooks, wires, rings, etc.). The metal mold has to be held tightly up against the bottom pour spout of the pot to get the extra pressure to fill the cavity. This results in a hot metal spit on the hand and arm. The hot metal is poured into the Ace Mold from above the gate and doesn’t spit on your hand. Although the molds are made for certain inserts, practically any hook or wire that will fit across the cavity can be used. Metal molds are limited to 1 to 8 cavities.

Ace molds are limited from 1 to 60 cavities according to the size of the mold. Aluminum molds solidify in 1 1/2 to 3 seconds. Ace molds from 2 to 4 seconds. Ace molds are limited from 1/32 oz, to 1 oz.. The big stuff belongs to the metal molds.

CUSTOM MOLDS

Unique shapes and applications are the heart of Ace mold. The following list are examples of the custom capability.

Ace Hand Molds and Fishing Molds
  1. Fishing jigs and lures.
  2. Fishing sinkers, weights, and trolling lures.
  3. Fishing spinner baits and buzz baits
  4. Fishing inline bait bodies.
  5. Weighted hooks.
  6. Plastic critter molds.
  7. Novelties, two headed nickel, pennies from heaven, etc.
  8. Muzzle loader bullets.
  9. Sling shot ammo.
  10. Custom blade lure weights.
  11. Ice jigs.
  12. Custom ice fishing depth finders
  13. Gripper lock cone mold aligners for spin casters
  14. Lead spoons for fishing.
  15. Soap casting.
  16. Scale weights.
Ace Hand Molds and Fishing Molds

All custom mold orders must be done over the phone. Call 813-948-1461.

The following is a list of in stock molds:

  1. Swim jigs, fresh and saltwater. 3/32, 1/8, 1/4, 3/8, 1/2
    3" 5" 7" 10" 12"
  2. 1/4 oz., large ring, ultra wide gap, arkie type brush guard jig. 3/0 hook, bronze and black nickel hook.
    7"
  3. 1/4 oz. round head, brush guard jig, 1/0, 2/0 and 3/0 hook
    3" 5" 7" 10" 12"
  4. Ant jigs, small and large, #6 & #8 gold hooks.
    3" 5" 7" 10" 12"
  5. Arrowhead jigs, 1/8, 1/4, 1/2, #1 or #2 bln hooks.
    5" 7" 10" 12"
  6. Small and large bridge jigs plain without eye sockets, deluxe with eye sockets and tie collars or barb, collars.
    3" 5" 7" 10" 12"
  7. Plain boxing glove jig, 1/16 1/8 1/4 double barb collar.
    3" 5" 7" 10" 12" Ace Hand Molds and Fishing Molds
  8. 1/4 rattle jig, 4mm glass rattle, 1/0 or 2/0 bin hook.
    7"
  9. 5/16 Dough boy jig, any reasonable hook.
    3" 5" 7" 10" 12"
  10. Block head jigs, 1/16 or 1/8, #6, #4, #2 hooks.
    5"
  11. Big eye jigs, 1/8, 1/4, 3/8, 1/0 2/0 3/0 hooks.
    3" 5" 7"
  12. 12 Banana jigs, 1/8, 1/4, 3/8, 1/2, 1, 1 1/2.
    3" 5" 7"
  13. Butterbean jigs, 1/8, 1/4, 3/8, 7/16, 1/2, 1, 1 1/4, 1 3/4.
    5" 7"
  14. Diamond, smilin betty, 1/4, 3/8, 1/2.
    3"
  15. Diamond jigs, 1/16, 1/4, 3/16, 1/0, blnhook.
    7"
  16. Footbal shakey head, 1/8, 1/4.
    3"
  17. Custom depth finder, alligator clip.
    3"
  18. Bullet crappie jigs, plain and eyed, #6, #4, hooks.
    3" 5" 7" 10"
  19. Assorted buck tail jigs, call form more information.
  20. Fishhead jigs with eye socket, 90° and 60° hooks 1/16, 1/8, 3/16, 1/4, 3/8, 5/8, 3/4, 9/16.
    3" 5" 7" 10" 12"
  21. Ultra wide gap fish head jigs,large ring, socket eye 3/8.
    7"
  22. Large and small speed loaders, #6 and #4 hooks.
    7"
  23. Horse heads with #12 or #10 swivel. #4 or #2 hooks.
    3" 5" 7"
  24. 1/4 natural fish body jig, uses straight tin plated hooks.
    3"
  25. Lead spoons, call for more information.
  26. Florida keys jigs, call for information.
  27. Round head jigs, no collar, barb collar and tie collar, any hook, eye socket or no eye socket.
  28. Round head continuation 1/64, 1/32, 1/16, 3/32, 1/8, 3/16, 1/4, 3/8, 1/2.
    3" 4" 5" 6" 7" 8" 9" 10" 12"
  29. Buzz Baits, call for information.
  30. Shad darts, 1/32, 1/16, 1/8, 1/4, 3/8, 1/2.
    3" 5" 7" 10" 12"
  31. Small shad cradle, 1/4 oz. tin plated hook
    7"
  32. Custom walleye and crappie jig, small, med. large.
    7"
  33. Shrimp eye jig, 1/8 oz. 2/0 tin coated hook.
    7" 10" 12"
  34. Custom Zonar molds
    7"
  35. Spinner baits, call for additional information.
  36. Novelties, Pennies from heaven, Lincoln head on the front. praying hands on the back. Wire loop optional.
  37. Novelty, Two headed nickle. Loop optional.
  38. Critter molds for soft plastic, call for more information.
Visitor Number
Valid CSS! Valid XHTML 1.0 Transitional Java Script Source Free DHTML Scripts.
Home Buy Lures Retail Outlets Tips Techniques Links Pictures
About Us Contact Us Testimonials Smack Tackle Forum
Copyright ©2006 Smack Tackle All Rights Reserved.